PV Modules

Does the tilt angle and/or orientation of the solar panel affect performance of the solar plant?

The performance of the solar panel is affected by its tilt angle and orientation with respect to the horizontal plane. Orienting the solar panel in a direction and tilt to maximize its exposure to direct sunlight can ensure a better generation. The solar panel collects solar radiation most efficiently when the sun’s rays are perpendicular to the panel’s surface. Solar panels should always face south if the plant is in the northern hemisphere, or north if the plant is in the southern hemisphere & the tilt of the solar panels should be proportionate to the latitude of the plant site to optimize their power generation throughout the year. The installer of the plant analyses the optimum tilt & orientation before installing the solar plant. [Source: Youtube] [Publisher: altE Store’s Educational Video Channel] Like this:Like Loading... Read more

Can my solar panels withstand harsh weather conditions?

Weather conditions are unlike in each location.  As solar plants are installed around the world, solar panel manufacturers test their products to ensure that they are dust & storm resistant, salt mist & ammonia corrosion resistant, capable to withstand hail storms & heavy snow loads & extreme temperature variations. The junction box attached with the modules are made waterproof. Like this:Like Loading... Read more

What is the function of bypass diode in solar panels?

When one (or more) solar photovoltaic cells becomes faulty or provides no power due to shading, the current then flows through the solar bypass diode and prevents hot spots and losses in yield. When part of a photovoltaic panel is shaded, the shaded cells will not be able to produce as much current as of the unshaded cells. Since all cells are connected in series, the same amount of current must flow through every cell. The unshaded cells will force the shaded cells to pass more current. This causes the solar panel to heat up, have a severe power loss. As a result, those shaded solar cells become consumers of electricity instead of producers. The function of bypass diode is, when a cell or a panel becomes shaded its bypass diode becomes “forward biased” and begins to conduct current through itself. The effected portion of the solar panel is bypassed, thus drastically reducing the amount of local heating & current loss at the shaded area. [Source: Youtube] [Publisher: altE Store’s Educational Video Channel] Like this:Like Loading... Read more

What is the solar panel efficiency?

The solar panel efficiency or conversion efficiency is the percentage of the solar energy striking on the panel that is converted into usable electricity. Not all of the sunlight that reaches a photovoltaic cell is converted into electricity. When light strikes the surface of a solar cell, some photons are reflected, while others pass right through, some of the absorbed photons have their energy turned into heat & the remainder have the right amount of energy to separate electrons from their atomic bonds to produce charge carriers and electric current. Most solar panels provide an energy efficiency rating between 11 to 18 percent, which is the percentage of solar energy that is being converted into usable electricity. A solar panel specification sheet usually contains a panel efficiency value at Standard Test Conditions(cell temperature of 25°C and an irradiance of 1000 W/m2). The higher the efficiency rating, the less number of panels you’ll need to make up a system that meets your energy requirements. However, choosing a more efficient solar panel may not always be the most cost-effective decision available. Like this:Like Loading... Read more

What is the effect of shading on a solar power plant?

Shading has a huge impact on the performance of solar photovoltaic panels. Solar power plants generate electricity proportionate to the amount of sunlight they receive. Therefore, when a shadow is cast on panels due to any obstruction in the path of sunlight falling on the panels, the power output decreases substantially. In fact, the solar photovoltaic panels consist of a number of cells which are connected together into a series circuit. Because of this, the performance of the solar panel is significantly reduced even if a smallest section of the panel is in shade. Another issue from partial shading is overheating. Because of partial shading a part of the solar panel generates lower amount of energy as compared to the other non-shaded part. As the amount of power generated from shaded & non-shaded parts differs, it leads to overheating, hot-spot creation & causing irreversible damage of the cells, which in turn reduces the total power output of the solar panel. Depending on the location of the object, the shading may be seasonal or for a few hours each day resulting in fluctuations in the power. The performance of solar  panels is affected by the shading effect due to trees, neighboring buildings, vegetation, poles and any other means. [Source: Youtube] [Publisher: altE Store’s Educational Video Channel] Like this:Like Loading... Read more

What are the major classifications of solar panels?

There are 3 major types of solar panels: 1. Monocrystalline 2. Polycrystalline 3. Thin Film 1. Monocrystalline Monocrystalline panels are the most efficient solar panels. They are made out of silicon ingots of very high purity. The silicon ingots are cut into thin wafers which are mounted in a grid shape. One can easily recognize them from the uniform dark look and the rounded edges. The silicon’s high purity causes this type of solar panel to have the highest efficiency rates. Monocrystalline panels have higher efficiencies, occupy less space but that also means they are the most expensive solar panels.   2. Polycrystalline Polycrystalline panels use melted silicon, which is poured and cut into perfectly square wafers. This melting process uses just about all the material, eliminating abundant waste during manufacturing. Polycrystalline panels  are the most commonly used type of panel for both residential and commercial installations. Their efficiency is slightly lower and are lesser expensive as compared to monocrystalline panels. 3. Thin Film Thin-film solar panels are not necessarily made from silicon like other panel varieties. These solar panels use alternative photovoltaic mediums that are deposited in a thin layer over a substrate. Thin-film solar panels are most often manufactured from cadmium telluride (CdTe), amorphous silicon (a-Si), copper indium gallium selenide (CIS/CIGS) etc. They are not as efficient as polycrystalline or monocrystalline panels and have large space requirements but can be made flexible, thus have numerous potential applications. These types of solar panels are the easiest to produce and economies […] Read more

1 2